Liquid-controls Mechanical Eliminators Manuel d'utilisateur télécharger pdf (Page 17)





• Pipe with as little restriction as possible. By minimizing restrictions, the air or

vapor eliminator will work as efciently as possible.

• ¾" (or larger) pipe/hose is recommend to vent air or vapor to the storage tank.

• ½" pipe/hose is recommended for piping to an air check or differential valve (⅜"

is acceptable).

• If using hose, choose a type that will not collapse in on itself (heater hose,

hydraulic hose, etc.).

• Be sure a catch vessel or spit receptacle is vented with a vent no smaller than

the pipe/hose connected to it. (Catch vessels vary in size but most are between 2

and 5 gallons.)

• Pipe the air eliminator vent port into the top of the catch vessel for maximum

efficiency.

• Liquid Controls recommends that catch vessels be drained regularly and that the

volume is indicated with a sight gauge, for example.



1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 31 32

Pas de commentaire

Liquid-controls Mechanical Eliminators Manuel d'utilisateur Page 17