Liquid-controls Mechanical Eliminators Manuel d'utilisateur télécharger pdf (Page 4)





Before disassembly of any meter or accessory component:





 .

-Pressure must be 0 (zero) psi.

-Close all liquid and vapor lines between the meter and liquid source.

For , refer to  and local authorities.





!









n Evacuate the building and notify your local re department.

n Stop the leakage only if you can safely reach the equipment.





n Stop the leakage if you can safely reach the equipment.

n Use the appropriate extinguisher: Class B re extinguisher, water, fog, etc., depending

on the materials.

n If in doubt, call your local re department.







n Evacuate the area and notify the re department.



n Stop the leak and prevent accidental ignition.

n Prevent the entrance of gas into other portions of the buildings. Some gases, such as

LPG, seek lower levels, while other gases seek higher levels.

n Evacuate all people from the danger zone.

n See that the gas is dispersed before resuming business and operating motors.

If in doubt, notify your local re department.





1 2 3 4 5 6 7 8 9 ... 31 32

Pas de commentaire

Liquid-controls Mechanical Eliminators Manuel d'utilisateur Page 4